Splitting Large Logs with a Log Splitter

Splitting Large Logs with a Log Splitter TIPS and TRICKS!

We have all had to deal with large logs. The amount of hassle and effort it takes to split them can often seem unnecessary. That is why you are here today. An easier way is available and splitting large logs with a log splitter is definitely possible. The only requirement is that you use the proper technique. The fancy technology associated with log splitters may be a bit more advanced than normal hand tools, but you will enjoy using them once you see how much less effort is required to get the job done. 

Split Wood with a Log Splitter

Gather Your Logs

Before you can begin cutting your large logs, you will need to gather them. Make sure to use proper techniques when cutting down a tree to obtain your logs. Observe the area and make sure that the tree is not near any phone polls or people. Plan your escape route, make the proper cuts, and get the tree down.

The next step is getting the tree into nice logs. Use a chainsaw or hand saw to get them into nice looking logs. Collect your logs and you are on your way to splitting them with your log splitter. 

Mark Your Logs

Using a log splitter to cut large logs is hard if you do not prepare your logs correctly. After getting your logs together, you will want to measure and mark them. You can always use a tape measure for this part, but there is an easier way to do it. Firewood markers do a great job of giving accurate and consistent measurements for you. Inputting a can of paint and rolling it down the log is all it takes. 

Cut Your Logs

Now, you can go ahead and cut your logs. A great way to do this is to prop them up. Cutting dirt will lead to dulling your chainsaw blades. Using a log jack is not required, but it is an easy way to go about propping your logs up for cutting. Click here to look at the Best Wood Log Splitter Reviews. Check Out Our Top Rated Recommendations!.

After successfully getting all your logs cut, you can go ahead and let them sit. Aging your logs is a good way to make sure they are high quality and ready to be split. Splitting dry wood is much easier than moist wood. Letting them sit out will remove most of the moisture in the logs and let them dry up in the sun. There is also an added benefit of the wood being lighter to carry.

Split Your Logs

Getting your log splitter out, you should be all set to split them. No matter the size, if you followed our guide today, you should not have any issues. When cutting your logs, you may want to make them a bit shorter than you normally would, but all else will go relatively easily. Cutting your log in half and then cutting that half into another half is the best way to go about larger pieces of wood. 


In conclusion, splitting large logs with a log splitter is not much different than normal logs. You just have to make sure you take the proper steps before you get to the log splitter. Cutting the wood correctly is vital. 

Rate this article

  • 5/5
  • 1 rating
1 ratingX
Very bad!BadHmmmOkeGood!