Chainsaw Carving

Chainsaw Carving Instructions for Begginers

​Carving with a chainsaw is a challenging task, but there are several ways to go about it. Once you get the jist of carving down, you will find carving to be a fun pass time. Depending on where you go, you will find different chainsaw carving instructions. Today, we will be going over many different methods you can use to go about chainsaw carving. This way, you get a broad scope of chainsaw carving.

What is Chainsaw Carving

Many different methods of art and sculpting have been developed over the years. One that has been around for a long time and is still common is chainsaw carving. So, what exactly is chainsaw carving? It is basically the act of carving out a model using wood. 

Chainsawing is a form of woodcarving and requires a bit of skill to pull off. Many have been drawn to this challenge and produced amazing sculptures out of wood. As such, you should not be discouraged from the activity. You can also get started with chainsaw carving, but first, you will need a few materials. 

Required Materials


A good way to look at chainsaw carving is through the act of wood carving. Most people do wood carving with a knife. This is typically done through smaller pieces of wood though. With wood chunks, a chainsaw is needed. It is bigger and much more sharp. It also makes it easier to mess up the carving. So, if you want the challenge, you should make sure to have a chainsaw on hand. Best Chainsaw Reviews. Check Out Our Top Rated Recommendations!

Sketching Tools

Just like with most art, you will be needing some sketching tools to plan out how you want to go about cutting the wood. This will help make sure the finished product is as good as it can be. Take your time when sketching out your model as this is an important step. The amount of time and work that you put into this will be worth it, but only if the model comes out good. Mistakes are hard to fix with chainsaw carving, so don't rush things.

Protective Gear

With chainsaws being so sharp, it should be obvious that you will need a good pair of gloves to protect your hands. You should also have eye ware, ear ware, and a helmet on. Having long jeans and boots to protect your feet are also recommended. You can never be too cautious when it comes to using dangerous machines like chainsaws. This is even more important for wood carving as you will be moving the chainsaw in ways that are not normally done. 

Tips for Success

Actually cutting the wood strictly depends on the design you are going for. However, there are some tips that we can give you to make sure you are capable of getting started. Searching some wood carving designs is a good place to start when looking for a model to make. 

Make sure the chainsaw you are using is sharp and not dull. This will make precise cutting much easier and allow for you to produce a better model in the end. As with most things, getting practice in is important. For starters, you need to get used to carrying around a saw and get used to its weight. The more familiar you are with it, the easier it will be to cut. Going along with this, understanding how saws work and what each part of it is called is something often overlooked as well. The more you know, the better. 

Getting books on woodcarving can help you as well. Learning about carving wood in general will give you a better understanding of the chainsaw carving aspect. Local events that involve woodcutting helps as well. If you can see others do it in person, it will allow for you to have a great reference to go to when cutting your own wood. 


In the end, learning chainsaw carving instructions is dependent on the model you are looking for. There is a lot that goes into chainsaw carving and mastering it will take some time. Do not give up though! There are tons of great resources available to get you started and on your way to creating great sculptures out of wood.